Rudyk, OleksandrPoberezhnyi, MykhailoKaplun, PavloGonchar, Volodymyr2025-10-202025-10-202025Rudyk O. Using SolidWorks Simulation as an innovative technology when calculating of performance of details / Oleksandr Rudyk, Mykhailo Poberezhnyi, Pavlo Kaplun, Volodymyr Gonchar // Actual problems in the system of education: general secondary education institution – pre-university training – higher education institution : Electronic International Scientific Journal. – Kyiv, 2025. – № 5. – P. 94–103. – URL: https://jrnl.nau.edu.ua/index.php/APSE/article/view/20256/27344.2786-5487 onlinehttps://elar.khmnu.edu.ua/handle/123456789/19671The SolidWorks Simulation software module was used to determine the strength parameters of the gear unit model: static analysis was selected as the type of study of its stress-strain state. The material from which the gear block is made is selected from the SolidWorks library. The attachment points of the gear unit model (fixed geometry) were selected and external loads were applied to it. Standard grids based on curvature with different values of Jacobian points and density were created. The resulting forces and moments of reaction acting on the gear unit are determined. A stiffness matrix was constructed and a finite element model of the gear block from its individual elements was synthesized. The resulting system of algebraic equations was solved and the components of the stress-strain state of the gear block were determined.The method of finite elements based on SolidWorks Simulation was applied to determine the dependence of the minimum coefficient of safety margin of the driven gear of the drum gear block of the vacuum spraying unit UVN-74 on the parameters of the finite element grid.enSolidWorks Simulationfinite element methodgear blockdriven gearsafety factorТези доповідей629.3