Перегляд за Автор "Skyba, M.Ye."
Зараз показуємо 1 - 10 з 10
Результатів на сторінці
Налаштування сортування
Документ Cavitation and erosion wear resistance of carbon structural steels(Хмельницький національний університет, 2019) Skyba, M.Ye.; Oleksandrenko, V.P.; Stechyshyn, M.S.; Martynyuk, A.V.; Скиба, М.Є.; Олександренко, В.П.; Стечишин, М.С.; Мартинюк, А.В.In the paper, based on the analysis of literary sources and own researches of authors, the results of cavitation and erosion wear resistance of structural steels are systematized depending on their thermal processing (structure) and type of environment. The structural structure of steels is based on the analysis of wear resistance during cavitation and erosion fracture of surfaces, and the mechanisms of cavitation fracture of dodectoid, zavectotoid and perlite steels are considered. Destruction of dodectoid steels begins with ferrite, and then extends to perlite grains. The wear resistance of the pearlite grains of the plate-shaped form is higher than that of perlite of the granular form. Cavitation wear resistance of zeutectoid steels is determined mainly by the properties of perlite. The mechanical properties of which depend on the dispersion and shape of the particles of cementite. In perlite steels, reducing the size of its grain increases their erosion resistance, especially in the presence of cementite in the structure of the grid, and not ferrite grids. Using different types of thermal and thermocyclic heat treatment, it is possible to form appropriate structures and, accordingly, increase the cavitation and erosion wear resistance.Документ Theoretical foundations of glow discharge nitriding of internal local recesses on metallic surfaces(Хмельницький національний університет, 2025) Stechyshyn, M.S.; Dykha, O.V.; Skyba, M.Ye.; Zdorenko, D.V.; Liukhovets, V.V.This paper presents a comprehensive analysis of internal local recesses on metallic surfaces during glow discharge nitriding. Various types of recesses and their geometric features are studied to evaluate their impact on electric field concentration, which in turn affects the uniformity of surface modification. A field concentration criterion is introduced to quantify these effects, and an analytical framework is developed to describe the relationship between surface geometry and electric field parameters. The influence of the dimensions of internal recesses on field concentration is examined using numerical simulations. The results provide a deeper understanding of the mechanisms leading to localized variations in current density distribution on nitrided surfaces. The developed analytical tools are applicable for predicting and controlling electric field concentration indicators in glow discharge processes used for the surface modification of metallic components, which is critical for ensuring optimal mechanical and tribological properties.Документ Wear resistance and physicochemical properties of 12XH3A carbohydrated steel(Khmelnytskyi National University, 2020) Skyba, M.Ye.; Stechyshyn, M.S.; Luk’yanyuk, M.M.; Martynyuk, A.V.; Tsepenyuk, M.I.; Gerasimenko, V.A.The results of the study of anhydrous carbohydrogenation influence in a smoldering discharge on the microhardness of a hardened 12XH3A steel layer depending on the propane content and pressure of the gas environment are presented in the paper. In accordance with the developed methodology of studying the influence of technological parameters of the process of carbonylation on the properties of structural materials, optimal modes of hardening of 12XH3A steel, depending on the operating conditions have been found.Документ Wear resistance of composite electrolytic coatings(Хмельницький національний університет, 2022) Skyba, M.Ye.; Stechyshyn, M.S.; Oleksandrenko, V.P.; Mashovets, N.S.; Bilyk, Y.M.; Скиба, М.Є.; Стечишин, М.С.; Олександренко, В.П.; Машовець, Н.С.; Білик, Ю.М.The article analyzes the influence of composite electrolytic coatings (CEC) on the wear resistance of structural steels. The issues of matrix selection and various combinations in composite coatings of different chemical elements and compounds are considered. Coatings based on chromium, nickel, iron, copper, cobalt and others are widely used in industry, but nickel-based composite coatings are the most widely used. Nickel is widely used as a matrix for CEC, because it has an affinity for most particles used as the second phase and easily forms a coating with them. These coatings are used for corrosion protection, increase of physical and mechanical and chemical parameters, increase of hardness and wear resistance, restoration of the sizes, giving to a surface of self-lubricating properties. Nickel-based coatings with SiC filler of various fractions from size 100/80 μm to nanoparticles smaller than 50 nm were investigated on the basis of the established installation for CEC application. Thus, SiC powders with the following sizes were used in the works: less than 50 nm - nanoparticles; M5; 28/20; 50/40; 100/80 μm. In the studies performed, 0.01… 0.02 g/l sodium lauryl sulfate was additionally introduced into the electrolyte, which promotes the incorporation of SiC particles into the coating and improves the conditions for building the Nickel matrix. Amorphous boron powders of about 1 μm size were also added to the silicon carbides as a filler, which is explained by the possibility of boron and nickel interaction during the subsequent heat treatment of the coating and obtaining new structures (solid solutions, eutectic, dispersion-hard alloys). It is of practical interest to study the possibility of improving the physical and mechanical properties of nickel-based CEC by introducing metals capable of heat treatment, interact with the metal matrix to form solid substitution solutions and chemical compounds (solid phases of implementation) and determine tribotechnical characteristics of these coatings.Документ Безводневе азотування в тліючому розряді з незалежними параметрами процесу(Хмельницький національний університет, 2019) Скиба, М.Є.; Стечишин, М.С.; Лукʼянюк, М.В.; Олександренко, В.П.; Skyba, M.Ye.; Stechyshyn, M.S.; Lukianiuk, M.V.; Oleksandrenko, V.P.Приведено аналіз переваг безводневого азотування в тліючому розряді з незалежними параметрами процесу, оцінені результати виконаних в цьому напрямку досліджень, намічено перспективи, що відкривають додаткові можливості в плані оптимізації режимів азотування, для забезпечення результатів модифікації максимальної відповідності вимогам підвищення працездатності об’єктів обробки в заданих умовах експлуатації.Документ Безводневе азотування у тліючому розряді як метод підвищення зносостійкості конструкційних сталей(Хмельницький національний університет, 2019) Скиба, М.Є.; Стечишина, Н.М.; Медведчук, Н.К.; Стечишин, М.С.; Люховець, В.В.; Skyba, M.Ye.; Stechyshyna, N.M.; Medvedchuk, N.K.; Stechyshyn, M.S.; Liukhovets, V.V.В роботі розглянуто актуальність застосування поверхневих методів зміцнення деталей машин. Особливу увагу приділено сучасним методам зміцнення, заснованим на дії концентрованих потоків енергії на поверхні металів, зокрема методу без водневого азотування в тліючому розряді (БАТР). Розглянута історія виникнення та розвитку технологій азотування. Показані переваги БАТР, а також основний напрямок досліджень у Подільському науковому фізико-технологічному центрі при ХНУ, що базується на енергетичній теорії процесів БАТР.Документ Дослідження процесів безводневого азотування в тліючому розряді(Хмельницький національний університет, 2018) Скиба, М.Є.; Стечишин, М.С.; Олександренко, В.П.; Курской, В.С.; Мартинюк, А.В.; Skyba, M.Ye.; Stechyshyn, M.S.; Oleksandrenko, V.P.; Kurskoy, V.S.; Martynyuk, A.V.У роботі наведена тематика науково-теоретичних і прикладних робіт, які проводяться в лабораторії Поділь- ського наукового фізико - технологічного центру (ПНФТЦ) при Хмельницькому національному університеті. На ос- нові проведених досліджень показана можливість значного розширення технологічних рамок безводневого азоту- вання в тліючому розряді завдяки можливості контролю і регулюванню не лише режимними, але і енергетичними параметрами процесу насичення поверхні азотомДокумент Застосування мікропроцесорних систем керування для формування динамічно розгорнутого зображення(Хмельницький національний університет, 2020) Прибега, Д.В.; Смутко, С.В.; Скиба, М.Є.; Корсун, С.Ю.; Prybeha, D.V.; Skyba, M.Ye.; Korsun, S.Y.В роботі розглянуто можливість створення пристрою для формування динамічно розгорнутого кольорового зображення з невеликою кількістю діодів. Запропоновано конструкції блоків індикації для формування динамічно розгорнутого зображення (7-колірного та повноколірного). Для запропонованих блоків індикації розроблено електричні схеми, блоки живлення, генерації та керування, а також конструкції лінійок зі світлодіодами. Розроблено програмний код для формування зображення. Виготовлено стенд для формування динамічно розгорнутого кольорового зображення та підтверджено працездатність блоків індикації.Документ Математичне моделювання пристрою для попереднього розрізання тари з поліетилентерефлаталу під час завантаження в роторні дробарки(Хмельницький національний університет, 2018) Місяць, В.П.; Місяць, О.В.; Скиба, М.Є.; Зозуля, П.Ф.; Поліщук, А.О.; Misiats, V.P.; Misiats, О.V.; Skyba, M.Ye.; Zozulia, P.F.; Polishchuk, A.O.Проведено аналіз недоліків роботи роторних дробарок під час подрібнення тари з поліетилентерефталату і доцільність їх оснащення додатковим різальним пристроєм валкового типу. Представлено математичне моделювання взаємодії валків з відходами тари. Визначено умови захвату стиснених пляшок валками і визначено їх мінімально необхідний діаметр.Документ Моделювання зміни надмолекулярної структури полімерних матеріалів під час орієнтаційної витяжки(Хмельницький національний університет, 2016) Синюк, О.М.; Скиба, М.Є.; Syniuk, O.M.; Skyba, M.Ye.Отримана математична модель зміни структури полімерів під дією навантаження розтягу, за допомогою якої можна розраховувати поля напружень та деформацій в будьякій точці сфероліту. За допомогою даної моделі структури полімеру можна визначати пружні властивості матеріалу (в повздовжньому та поперечному до його осі напрямках) при його осьовій витяжці та зсуві.