Особенности изнашивания детонационных покрытий FeA2-Ti-Si в тяжелонагруженных узлах трения
Вантажиться...
Файли
Дата
2013
Автори
Бысь, С.С.
Bys, Sergey
Назва журналу
Номер ISSN
Назва тому
Видавець
Хмельницький національний університет
Анотація
Проведён анализ особенностей изнашивания разработанного детонационного покрытия FeAl2TiSi,
определены оптимальные нагрузочные диапазоны его эксплуатации, которые обеспечивают минимальный износ
в условиях изменения скоростей скольжения и материалов контртел.
The purpose of this work is to determine for developed detonation coatings FeAl2TiSi optimal load range minimal wear in the changing sliding speeds and materials counterbodies. In the study of the laws of friction and wear mechanisms causing surface damage coatings, use of modern physical methods, namely Xray analysis and microphase. Tribological properties of the coatings was evaluated mechanical friction model samples in a distributed contact, after finishing coating thickness is 0,18 ÷ 0,25 mm, roughness Ra 0,63 ÷ 0,32 mm. For comparison, under the same conditions of test specimens with sprayed coating BK15 alloy, hardened steel 45 30ХГСНА, ХВГ and antifriction bronze БрОЦС663. The results of the research showed that the detonation coating FeAl2TiSi has a sufficiently high tribological characteristics to use in heavyduty friction instead of scarce and expensive coatings.
The purpose of this work is to determine for developed detonation coatings FeAl2TiSi optimal load range minimal wear in the changing sliding speeds and materials counterbodies. In the study of the laws of friction and wear mechanisms causing surface damage coatings, use of modern physical methods, namely Xray analysis and microphase. Tribological properties of the coatings was evaluated mechanical friction model samples in a distributed contact, after finishing coating thickness is 0,18 ÷ 0,25 mm, roughness Ra 0,63 ÷ 0,32 mm. For comparison, under the same conditions of test specimens with sprayed coating BK15 alloy, hardened steel 45 30ХГСНА, ХВГ and antifriction bronze БрОЦС663. The results of the research showed that the detonation coating FeAl2TiSi has a sufficiently high tribological characteristics to use in heavyduty friction instead of scarce and expensive coatings.
Опис
Ключові слова
износ, детонационные покрытия, износостойкость, прочность, вторичные структуры, wear, detonation coatings, wear resistance, strength, secondary structures
Бібліографічний опис
Лисовой, Е.Н. Особенности изнашивания детонационных покрытий FeA2-Ti-Si в тяжелонагруженных узлах трения [Текст] / Е. Н. Лисовой, С. С. Бысь // Вісник Хмельницького національного університету. Технічні науки. – 2013. – № 2. – С. 25-30.