Залежність зносостійкості композиційних електролітичних покриттів від об’ємного вмісту і розмірів частинок зміцнюючої фази
Вантажиться...
Файли
Дата
2020
Автори
Стечишин, М.С.
Білик, Ю.М.
Машовець, Н.С.
Курской, В.С.
Stechyshyn, M.S.
Bilyk, Yu.M.
Mashovets, N.S.
Kurskoy, V.S.
Назва журналу
Номер ISSN
Назва тому
Видавець
Хмельницький національний університет
Анотація
Досліджено кавітаційно-ерозійну зносостійкість сформованих композиційних електролітичних
покриттів (КЕП) з частинками карбіду кремнію (SiC) різних геометричних розмірів в нейтральних, кислих та
лужних середовищах. Показано, що КЕП з частинками SiCнано і SiC5 у середньому в 6 разів підвищують
зносостійкість сталі 45 нормалізованої в жорсткій воді, у 11 разів в 3-відсотковому розчині NaCl і більше ніж в 16
разів в кислому середовищі. Дослідження також показали, що зі зростанням корозійної активності середовища
ефективність дії КЕП зростає, а збільшення розмірів частинок SiC зменшує кавітаційно-ерозійну зносостійкість
покриття. Для частинок SiC50 і SiC28 максимальні значення кавітаційно-ерозійної зносостійкості в усіх
досліджених середовищах досягаються при їх вмісті в нікелевій матриці C=22…25%.
The aim of the work is to study the cavitation-erosion wear resistance of formed composite electrolytic coatings (CEC) with silicon carbide (SiC) particles of different geometric sizes and different volume content in the nickel matrix in neutral, acidic and alkaline media. It is shown that CEC with SiCnano and SiC5 particles on average 6 times increase the wear resistance of steel 45 normalized in hard water, 11 times in 3% NaCl solution and more than 16 times in acidic environment. Studies have also shown that with increasing corrosion activity of the environment, the efficiency of CEC increases, and increasing the size of SiC particles reduces the cavitation and erosion resistance of the coating. It was found that increasing the volume content of SiCnano and SiC5 particles in the Nickel matrix increases the cavitation-erosion resistance of CEC in all media. The effectiveness of the effect of SiCnano and SiC5 particles on the wear resistance of CEC in 3% NaCl solution is manifested at their volume content of the matrix C10%. For SiC50 and SiC28 particles, the maximum values of cavitation-erosion wear resistance in all studied media are achieved when their content in the nickel matrix C=22…25%. In the future, it is necessary to investigate the influence of the stress-strain state of the hardened surface, the distance between SiC particles on the physicochemical and tribological characteristics of CEC.
The aim of the work is to study the cavitation-erosion wear resistance of formed composite electrolytic coatings (CEC) with silicon carbide (SiC) particles of different geometric sizes and different volume content in the nickel matrix in neutral, acidic and alkaline media. It is shown that CEC with SiCnano and SiC5 particles on average 6 times increase the wear resistance of steel 45 normalized in hard water, 11 times in 3% NaCl solution and more than 16 times in acidic environment. Studies have also shown that with increasing corrosion activity of the environment, the efficiency of CEC increases, and increasing the size of SiC particles reduces the cavitation and erosion resistance of the coating. It was found that increasing the volume content of SiCnano and SiC5 particles in the Nickel matrix increases the cavitation-erosion resistance of CEC in all media. The effectiveness of the effect of SiCnano and SiC5 particles on the wear resistance of CEC in 3% NaCl solution is manifested at their volume content of the matrix C10%. For SiC50 and SiC28 particles, the maximum values of cavitation-erosion wear resistance in all studied media are achieved when their content in the nickel matrix C=22…25%. In the future, it is necessary to investigate the influence of the stress-strain state of the hardened surface, the distance between SiC particles on the physicochemical and tribological characteristics of CEC.
Опис
Ключові слова
КЕП, кавітаційно-ерозійна зносостійкість, електроліз, нікелева матриця, карбід кремнію, CEC, cavitation-erosion wear resistance, electrolysis, nickel matrix, silicon carbide
Бібліографічний опис
Залежність зносостійкості композиційних електролітичних покриттів від об’ємного вмісту і розмірів частинок зміцнюючої фази / М. С. Стечишин, Ю. М. Білик, Н. С. Машовець, В. С. Курской // Вісник Хмельницького національного університету. Технічні науки. – 2020. – № 5. – С. 286-290.