Чисельно-аналітичне моделювання механічних коливань кварцових п'єзоелементів АТ-зрізу

dc.contributor.authorТаранчук, А.А.
dc.contributor.authorКушнір, Б.В.
dc.contributor.authorTaranchuk, A.
dc.contributor.authorKushnyr, B.
dc.date.accessioned2019-12-22T14:47:24Z
dc.date.available2019-12-22T14:47:24Z
dc.date.issued2019
dc.description.abstractПобудована COMSOL-модель кварцових п’єзоелементів товщинно-зсувних коливань та досліджені особливості їх збудження на основних та додаткових модах механічних коливань. Проведено порівняльний аналіз резонансних частот п’єзоелементів АТ-зрізу, розрахованих аналітичним шляхом та отриманих в результаті моделювання в COMSOL Multiphysics, який підтверджує адекватність проведених досліджень. Підтверджено високу ефективність використання пакету COMSOL Multiphysics для дослідження та оптимізації параметрів п’єзорезонансних пристроїв.uk_UA
dc.description.abstractCOMSOL - a model of quartz piezo-element of thickness-shear vibrations was constructed and the features of their excitation on the basic and additional modes of mechanical vibrations were investigated. A comparative analysis of resonance frequencies of AT - cut piezo-elements, calculated analytically and obtained as a result of simulation in COMSOL Multiphysics, which confirms the adequacy of the conducted researches, was carried out. The high efficiency of the COMSOL Multiphysics package for research and optimization of piezo-resonance device parameters has been confirmed. A number of theoretical and practical works are devoted to solving the problems of oscillations of elastic piezoelectric plates. Thus, in, the authors developed a two-dimensional plate theory, which is used to analyze the low-order modes of thickness-shear oscillations. This theory for the study of mechanical oscillations of quartz piezoelectric elements has become widespread, in particular in [8,9] the proposed two-dimensional scalar differential equation describing higher-order modes for quartz PE AT-sections and SC-sections. The calculations presented are accurate only through the introduction of significant simplifications in the analysis of the mechanical vibrations of the piezoelectric plates. Thus, the assumption is that the effects occurring in the direction of the length and width of the piezoelectric elements of the TC of limited size oscillations are negligible compared to the deformations determined by their thickness. Therefore, in two-dimensional studies of piezoplates, their sizes are usually assumed to be infinitely large in length and width (or diameter). This does not in many cases provide the required accuracy of the calculations of the resonance frequencies, for example, for single- and double-convex (lens) PEs, and the determination of the quantities included in the calculation formulas is rather complicated and time-consuming.uk_UA
dc.identifier.citationТаранчук А. А. Чисельно-аналітичне моделювання механічних коливань кварцових п'єзоелементів АТ-зрізу [Текст] / А. А. Таранчук, Б. В. Кушнір // Вимірювальна та обчислювальна техніка в технологічних процесах. – 2019. – № 1. – С. 32-38.uk_UA
dc.identifier.issn2219-9365
dc.identifier.otherDOI: 10.31891/2219-9365-2019-63-1-32-38
dc.identifier.urihttps://elar.khmnu.edu.ua/handle/123456789/8271
dc.language.isoukuk_UA
dc.publisherХмельницький національний університетuk_UA
dc.subjectкварцовий резонаторuk_UA
dc.subjectп’єзоелемент AT-зрізуuk_UA
dc.subjectтовщинно-зсувні коливанняuk_UA
dc.subjectмода збудження коливаньuk_UA
dc.subjectдвовимірна модельuk_UA
dc.subjectquartz resonatoruk_UA
dc.subjectAT-cut piezo-elementuk_UA
dc.subjectthickness-shear vibrationuk_UA
dc.subjectmode of oscillation excitationuk_UA
dc.subject2-D modeluk_UA
dc.subject.udc621.397uk_UA
dc.titleЧисельно-аналітичне моделювання механічних коливань кварцових п'єзоелементів АТ-зрізуuk_UA
dc.title.alternativeNumerical and analytical modeling of thickness-vibration of ат-cut quartz piezoelementuk_UA
dc.typeСтаттяuk_UA
Файли
Контейнер файлів
Зараз показуємо 1 - 1 з 1
Вантажиться...
Ескіз
Назва:
8.pdf
Розмір:
1.01 MB
Формат:
Adobe Portable Document Format
Опис:
Ліцензійна угода
Зараз показуємо 1 - 1 з 1
Назва:
license.txt
Розмір:
4.26 KB
Формат:
Item-specific license agreed upon to submission
Опис:
Зібрання