Аналіз динамічних характеристик приводу вібраційного обладнання для нанесення мастилоутримуючих канавок
Вантажиться...
Файли
Дата
2013
Автори
Гордєєв, О.А.
Gordeev, O.A.
Кармаліта, А.К.
Karmalita, A.K.
Назва журналу
Номер ISSN
Назва тому
Видавець
Хмельницький національний університет
Анотація
Наведено конструкцію обладнання для нанесення лунок. Побудовано аналітичну модель коливального
процесу мембранного приводу камери пульсації. При її створенні були прийняти певні припущення та обмеження.
Визначено амплітудо-частотну характеристику приводу.
This scheme shape forming movements in equipment and construction equipment drive vibration causing holes. An analytical model of the oscillatory process chamber over the membrane fluctuations. At its creation to accept certain assumptions and limitations. Defined amplitude-frequency response of the drive. Powered graphical dependence of the amplitude of the frequency. From the analysis of the constructed model membrane fluctuations vibration pulsation chamber about the installed non-linear dependence of amplitude on frequency. The dependences to assess the dynamic pressure and maximum jet velocity, resulting in attachment depending on the frequency of oscillation. From the analytical model that is proposed, it was found that the maximum productivity of equipment and power hitting balls on the surface can be achieved at frequencies of oscillation of the membrane from 12 Hz to 14 Hz.
This scheme shape forming movements in equipment and construction equipment drive vibration causing holes. An analytical model of the oscillatory process chamber over the membrane fluctuations. At its creation to accept certain assumptions and limitations. Defined amplitude-frequency response of the drive. Powered graphical dependence of the amplitude of the frequency. From the analysis of the constructed model membrane fluctuations vibration pulsation chamber about the installed non-linear dependence of amplitude on frequency. The dependences to assess the dynamic pressure and maximum jet velocity, resulting in attachment depending on the frequency of oscillation. From the analytical model that is proposed, it was found that the maximum productivity of equipment and power hitting balls on the surface can be achieved at frequencies of oscillation of the membrane from 12 Hz to 14 Hz.
Опис
Ключові слова
вібраційне обладнання, динамічні характеристики, vibrating equipment, dynamic characteristics
Бібліографічний опис
Гордєєв, О. А. Аналіз динамічних характеристик приводу вібраційного обладнання для нанесення мастилоутримуючих канавок [Текст] / О. А. Гордєєв, А. К. Кармаліта, В. М. Павліський // Вісник Хмельницького національного університету. Технічні науки. – 2013. – № 5. – С. 16-20.