Розробка і дослідження багатопозиційного гідроапарату технологічної машини
Вантажиться...
Дата
2024
Назва журналу
Номер ISSN
Назва тому
Видавець
Хмельницький національний університет
Анотація
Згідно аналізу конструкцій технологічних машин, що мають декілька виконавчих механізмів, які
працюють послідовно відповідно технологічним діаграмам, і отримують рухи від електропривода через ланцюги
механічних передавальних механізмів, що складаються із множини кінематично з’єднаних пар тертя і деталей,
ускладнені у конструкції та її виготовленні, мають велику вагу зменшену надійність в роботі.
Авторами пропонується розроблена гідравлічна система розподілення руху на робочі механізми
технологічної машини, яка складається з оригінальної конструкції багатопозиційного багатолінійного
гідроапарату, який може забезпечити розподілення руху на декілька гідро двигунів робочих механізмів
технологічної машини відповідно циклограми її роботи та замінити ланцюги механічних передавальних
механізмів і деталей.
Оригінальність конструкції багатопозиційного багатолінійного одно золотникового гідроапарату
полягає в тому, що він поєднує в собі властивості гідро розподільника золотникового та вентильного типу, а сам
золотник має складну секційну циліндричну форму з вирізаними секторами і робить обертальний, а не зворотно
поступальний рух. Розроблений гідроапарат може виконувати, як розподільну, так і керуючу функцію та може
замінити керовані автоматичні пристрої.
Розроблена матмодель розрахунку об’єму робочих порожнин гідроапарату (гідро розподільника).
З метою перевірки працездатності гідроапарату нової конструкції проведено його параметричне
моделювання у системі Solid Works і цикл експериментальних досліджень із застосуванням модуля Flo Works.
Отримано результати розподілу рідини у гідроапараті для окремих порожнин, що з’єднані з гідро лініями
гідро двигунів робочих механізмів технологічної машини.
Принцип конструювання нового гідроапарату може бути використаний для розподілення рідини у
технологічних машинах з різними циклами взаємодії механізмів
According to the analysis of the designs of technological machines that have several executive mechanisms that work sequentially according to the technological diagrams and receive movements from the electric drive through chains of mechanical transmission mechanisms consisting of a set of kinematically connected friction pairs and parts, complicated in the design and its production, have reduced reliability in operation. The authors propose a developed hydraulic system for distributing motion to the working mechanisms of the technological machine, which consists of an original design of a multi-position, multi-line hydraulic apparatus, which can ensure the distribution of motion to several hydro motors of the working mechanisms of the technological machine in accordance with the cyclogram of its operation and replace the chains of mechanical transmission mechanisms and parts. The originality of the design of the multi-position, multi-line, single-spool hydraulic device is that it combines the properties of a spool- and valve-type hydraulic distributor, and the spool itself has a complex sectional cylindrical shape with cut sectors and makes a rotary, not reverse translational movement. The developed hydraulic device can perform both distribution and control functions and can replace controlled automatic devices. A math model for calculating the volume of the working cavities of the hydraulic device (hydraulic distributor) was developed. In order to check the operability of the hydraulic apparatus of the new design, its parametric modeling in the SolidWorks system and a cycle of experimental studies using the FloWorks module were carried out.The results of the distribution of liquid in the hydraulic apparatus for individual cavities connected to the hydraulic lines of the hydraulic motors of the working mechanisms of the technological machine were obtained. The principle of designing a new hydraulic device can be used to distribute liquid in technological machines with different cycles of mechanism interaction
According to the analysis of the designs of technological machines that have several executive mechanisms that work sequentially according to the technological diagrams and receive movements from the electric drive through chains of mechanical transmission mechanisms consisting of a set of kinematically connected friction pairs and parts, complicated in the design and its production, have reduced reliability in operation. The authors propose a developed hydraulic system for distributing motion to the working mechanisms of the technological machine, which consists of an original design of a multi-position, multi-line hydraulic apparatus, which can ensure the distribution of motion to several hydro motors of the working mechanisms of the technological machine in accordance with the cyclogram of its operation and replace the chains of mechanical transmission mechanisms and parts. The originality of the design of the multi-position, multi-line, single-spool hydraulic device is that it combines the properties of a spool- and valve-type hydraulic distributor, and the spool itself has a complex sectional cylindrical shape with cut sectors and makes a rotary, not reverse translational movement. The developed hydraulic device can perform both distribution and control functions and can replace controlled automatic devices. A math model for calculating the volume of the working cavities of the hydraulic device (hydraulic distributor) was developed. In order to check the operability of the hydraulic apparatus of the new design, its parametric modeling in the SolidWorks system and a cycle of experimental studies using the FloWorks module were carried out.The results of the distribution of liquid in the hydraulic apparatus for individual cavities connected to the hydraulic lines of the hydraulic motors of the working mechanisms of the technological machine were obtained. The principle of designing a new hydraulic device can be used to distribute liquid in technological machines with different cycles of mechanism interaction
Опис
Ключові слова
гідроапарат, циклограма роботи, матмодель, гідродвигуни виконавчих механізмів, числові дослідження, hydraulic apparatus, cyclogram of work, hydraulic motors of executive mechanisms, mat model, numerical studies
Бібліографічний опис
Розробка і дослідження багатопозиційного гідроапарату технологічної машини / О. Коротич, В. Неймак, Е. Золотенко, В. Сухоставський, Ю. Михайловський // Вісник Хмельницького національного університету. Технічні науки. – 2024. – Т. 337, № 3 (2). – С. 11-15.