Mетоди неруйнівної діагностики надійності герметизації модулів надвисоких частот
Вантажиться...
Дата
2018-12
Автори
Бойко, Юлій Миколайович
Ковтун, Ігор Іванович
Петращук, Світлана Анатоліївна
Ковальчук, Олександр Вікторович
Boiko, J.
Kovtun, I.
Petrashchuk, S.
Kovalchuk, O.
Назва журналу
Номер ISSN
Назва тому
Видавець
Хмельницький національний університет
Анотація
Об’єктами представленого дослідження є корпуси модулів надвисоких частот спеціального призначення,
зокрема тих, які використовуються в авіаційних, морських і наземних системах навігації, керування і захисту
сучасних надзвукових літаків, військового, цивільного та подвійного призначення. В процесі експлуатації корпуси
піддаються численним перепадам зовнішнього тиску та температури, що може призвести до їх розгерметизації.
Випробування проводились на створеному стенді, який складається із термо-пневматичної, тензометричної та
акустико-емісійної систем. Проведені випробування корпусів внутрішнім надлишковим тиском виявили розкид
значень тиску розгерметизації, що свідчить про нестабільність та ненадійність технології герметизації,
зокрема лазерного зварювання та пайки. Застосування тензометричного та акустико-емісійних методів
дозволили виявити характер напружено-деформованого стану корпусів і отримати інформативні параметри
сигналів акустичної емісії, які були використані для розробки методу неруйнівного діагностування та
прогнозування міцності і герметичності корпусів модулів надвисоких частот.
Опис
The research given in the paper is focused on the strength and hermetic seal of the super-high-frequency sealed electronic
modules which are installed onboard of airplanes, rockets or other type of transport and hence exposed to harsh environment of atmospheric
air pressure and temperature drops which are likely to cause their depressurization. The cases of modules are made from aluminum alloy
AMG-2 and sealed either by welding or by soldering. The cases differ in sizes and design of the sealed joint. For conducting thermal and
overpressure tests the test installation has been developed which represents the train made of the following parts: tensometry and acoustic
emission instruments, which are connected to personal computer through the analog-to-digital converter and system, interface; thermal and
pressure testing systems. The research methods performed by the test installation are: manometrical method for evaluating excessive
pressure that causes depressurization; acoustic emission method for defect detection and monitoring when the object is under pressure or
temperature impacts; tensometry method for measuring strain and estimating stress in objects with respect to excessive pressure; and
bubble method for location of places of the hermetic seal damages. Analysis of stress and deflection of the tested cases, in particular their
caps and seams, revealed the inherent character of deformation that may cause depressurization of the sealed joints when those sustain
inner overpressure. Analysis of acoustic emission data received during tests revealed informative parameters applicable for nondestructive
tests of strength and hermetic seal for modules subjected to overpressure and thermal impacts. The nondestructive hermetic seal diagnostics
and prediction method has been developed for cases of super-high-frequency modules by acceptable inner overpressure and thermal test’s in
accordance to which the tested case complies with technological standard in specified pressure range if specified acoustic emission
parameter does not exceed the acceptable limit, otherwise the case is rejected or its depressurization is predicted by predefined prediction
factor.
Ключові слова
герметичність, корпус, тензометрія, акустична емісія, деформація, напруження, тиск, hermetic seal, case, tensometry, acoustic emission, strain, stress, overpressure
Бібліографічний опис
Mетоди неруйнівної діагностики надійності герметизації модулів надвисоких частот / Ю. М. Бойко, І. І. Ковтун, С. А. Петращук, О. В. Ковальчук // Вісник Хмельницького національного університету. Технічні науки. - Хмельницький, 2018. – № 6, т. 1. - С. 227-233.