Problems of Tribology = Проблеми трибології - 2022 рік
Постійне посилання зібрання
Переглянути
Перегляд Problems of Tribology = Проблеми трибології - 2022 рік за Ключові слова "auger press"
Зараз показуємо 1 - 3 з 3
Результатів на сторінці
Налаштування сортування
Документ The influence of alloying with manganese and chromium of steel hardened and tempered auger on its relative wear resistance during dehydration in a municipal solid waste truck(Хмельницький національний університет, 2022) Bereziuk, O.V.; Savulyak, V.I.; Kharzhevskyi, V.O.; Березюк, О.В .; Савуляк, В.І.; Харжевський, В.О.The article is dedicated to the study of the influence of alloying with manganese and chromium followed by hardening and tempering of the auger on its wear resistance during the dehydration of municipal solid waste truck. The use of a mathematical apparatus and appropriate regression analysis programs made it possible to determine the dependence of the wear resistance of the auger on the content of manganese and chromium in the steel of the auger for the case of its quenching and tempering. Constructed graphical dependences of relative wear resistance with the indicated alloying and heat treatment of the screw revealed a significant influence of the concentration of manganese and chromium in steel, sufficient convergence of the obtained patterns was confirmed. It was established that after operation and wear on the path s = 56850 m during the dehydration of solid waste in a garbage truck, an increase in the manganese content in the steel of the heat-treated screw from 0.32% to 1.8% leads to a decrease in energy intensity by 10 kWh/tons, and an increase chromium content in screw steel after similar heat treatm ent from 0% to 6% leads to a decrease in energy consumption by 11.5 kWh/tons and to a reduction in the cost of the solid waste dehydration process in the garbage truck. It was determined that tempering the chromium-manganese screw steel after its hardening allows reducing energy consumption by 1.26...2.56 kWh/tons , depending on the chromium content. The expediency of conducting further research on determining the rational composition and structural state of t he auger material and ways to increase its wear resistance has been revealed.Документ The influence of the alloying of the auger by the chromium on its wear during dehydration process of municipal solid waste in the garbage truck(Хмельницький національний університет, 2022) Bereziuk, O.V.; Savulyak, V.I.; Kharzhevskyi, V.O.; Березюк, О.В.; Савуляк, В.І.; Харжевський, В.О.The article is dedicated to the study of the influence of the alloying of the auger by the chromium on its wear during dehydration of solid waste in the garbage truck. Using the method of regression analysis, the hyperbolical dependencies of auger wear depending on the chromium content in its hardened steel for different values of the friction path are determined. Graphical dependences of augur wear depending on the chromium content in its hardened material as a function of the friction path are made up, and it confirms sufficient convergence of the obtained dependencies. Carried out additional regression analysis allowed to determine that that during two weeks of operation of the auger during dehydration of solid waste in the garbage truck increasing of the chromium content in its hardened material from 0.25% to 12% reducing the speed of the wearing and energy consumption of solid waste dehydration from 12.2% to 3.1%, and, consequently, to reduce the cost of the process of their dehydration in the garbage truck. It is shown the graphical dependence of the reduction of energy consumption of dehydration of solid household waste by the hardened auger due to its alloying by the chromium. It was established the expediency of further research to determine the rational content and structural state of the material of the auger and the ways to increase its wear resistance.Документ The influence of the chemical composition of the hardened auger on its wear during dehydration process of municipal solid waste in the garbage truck(Хмельницький національний університет, 2022) Bereziuk, O.V.; Savulyak, V.I.; Kharzhevskyi, V.O.; Березюк, О.В.; Савуляк, В.І.; Харжевський, В.О.The article is dedicated to the study of the influence of the chemical composition of the hardened auger by the chromium on its wear during dehydration of solid waste in the garbage truck. Using the rotatable central composition planning of the experiment of the second order by means of the Box-Wilson method, the dependencies of auger wear depending on the chemical composition of the hardened steel and friction path are determined. The responce surfaces of the objective functions are shown – the wearing of the hardened steel and energy consumption of the dehydration process by the hardened auger press of the mixed municipal solid waste according to the influense parameters. It is established that on the friction path s = 56850 m, during the dehydration process of solid waste in the garbage truck, the simultanuous incresing of the carbon content from 0.45% to 2.1%, and the chromium content – from 0.25% to 12%, at the optimum content of the manganese as 0.527% in the hardened steel of the auger, enable to decrease the energy consumption of the dehydration process of solid waste by 25.7 kWh/tons, or 10.7%. Therefore, it tends to cheaper the process of dehydration in the garbage truck. It is established the expediency of further research for the determination the rational composition and the structural state of the auger material and the ways to increase its wear resistance.