Innovative learning method using SolidWorks
Вантажиться...
Дата
2024
Назва журналу
Номер ISSN
Назва тому
Видавець
Полтава: ФКУЕП ПДАУ
Анотація
The extreme operating conditions of the elements of modern structures, the complexity of their shape and large dimensions make it extremely difficult and expensive to carry out full-scale or semi-full-scale experiments, especially when it comes to establishing limit (destructive) loads. The creation of structures (stands) of this type is impossible without improvement and automation of the design process.
At the moment, such stands are not used in car repair shops, and the existing designs are not unified (they are used only for a certain model and its modification). All operations are carried out on metalworking machines. Therefore, developed a stand for simplifying and accelerating the process of disassembling and assembling gearboxes of car bridges. Compared with a similar rack, both the mechanization and automation of the process, as well as the convenience and quality of disassembling and assembling units, increase, and the work becomes easier.
Опис
But the performance of the stand depends on the strength characteristics of its parts. Therefore, with the help of SolidWorks Simulation, the following studies were carried out: analyzed the model of the movable leaf to obtain a picture of its stress-deformed state; a similar study of a fixed leaf was performed; carried out a static calculation of the stand lock. Since the stand contains other parts, we will conduct a static calculation of the stand finger.
Ключові слова
автомобілі, задні мости, редуктори, ремонт, стенд, палець, SolidWorks, розрахунок
Бібліографічний опис
Rudyk О. Yu. Innovative learning method using SolidWorks / О. Yu. Rudyk, D. V. Vasylyshyn, S. A. Grynkov, A. M. Popov // Ресурсно-орієнтоване навчання в «3D»: доступність, діалог, динаміка : збірник тез доповідей IV Міжнародної науково-практичної інтернет-конференції (м. Полтава, 22–23 лютого 2024 року). – Полтава : ФКУЕП ПДАУ, 2024. – С. 534-538.